معلومات فنية

Keep your handheld device within easy sight and reach in your car! The ProClip makes it easier and safer to use handheld devices in vehicles. The ProClip is a mounting bracket that you attach to the dashboard of your car. Onto the ProClip, you can install any accessory, e.g. a holder for mobile phone or other communication device.

The ProClip is car specific, it is customized for each car model and has a perfect fit. The ProClip offers a firm mounting platform and is available in multiple positions for most vehicles. Discreet design that blends in well with the interior. Safe, neat and convenient!

The ProClip is easy to install, you can do it in a minute! You simply snap the ProClip into place in gaps in the interior, you do not need to drill holes or use special tools or dismantle the dashboard. Detailed mounting instructions included. The ProClip has AMPS holes for easy installation of a holder. Made of high grade ABS/Acetal plastic. Color: Black. Developed and produced in Sweden.

- Do you want to be able to switch between several holders on the same ProClip? Please see Brodit’s MultiMoveClip.

- Are you installing larger devices or heavier equipment? Please see Brodit’s Extra Strength Mounting Platforms and Pedestal Mounts.

التعليمات

Please read all of the instructions and look at the pictures before attaching the ProClip mount. It is important to install the mount first: any device holder/equipment is to be attached after the mount is in place. This mount consists of two parts: a mounting bracket and a mounting plate. The mounting plate can be attached at any desired angle.

1. Press the thin end of the enclosed gap openers into the gap between the center console frame and the sidewall, to widen the gap.

Use the enclosed alcohol pad to clean the area where the mount will be installed. Peel off the adhesive tape cover. Hook the upper edge of the mounting bracket over the center console frame. Press one corner into the gap between the gap openers. Press down on top of the bracket so the edge goes all the way into the gap. Pull out the gap openers.

2. Pull the lower part of the bracket out from the center console without touching the padded sidewall. Press the left part toward the console sidewall and hook the lower edge of the mount under/behind the console sidewall. Press upward on the lower edge so it hooks properly in place.

3. Place the plate on top of the bracket so the holes match, and turn it into desired position with respect to the device/equipment to be installed. Attach the place onto the bracket with the enclosed screws.

4. The ProClip mount is in place

التوافق

• Subaru : Impreza
• Subaru : Forester
• Subaru : Crosstrek