مرحبا بكم في موقعنا الجديد..!! إكتشف مجموعتنا الواسعة من خيارات التثبيت المصممة خصيصاً لسيارتك..!

Active holder with USB-cable and cig-plug adapter

رقم الصنف : 721409

With USB Type-C + cig-plug adapter with 2 USB ports: Type-A and Type-C, QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt.

Apple iPad Pro 11 2024 (A2836, A2837, A3006)

الكمية

إنتهى من المخزن

الوصف

With USB Type-C + cig-plug adapter with 2 USB ports: Type-A and Type-C, QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt.

معلومات فنية

Keep your unit's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With USB-C cable with cig-plug adapter, choose to connect either to the vehicle's USB-C outlet or the 12/24V socket. The cig-plug adapter has two USB ports: Type-A and Type-C. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car.

  • The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden.

  • An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.

  • التعليمات

    Please read all of the instructions and look at the pictures before attaching the holder.

  • 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.
  • Image
  • 2. To place the device in the holder: Slide the device sideways into the holder until you hear / feel it snaps into place.
  • Image
  • 3. To remove the device from the holder: Slide the device sideways and out.
  • Image
  • 4. The holder is in place.
  • Image

    التوافق

    • Apple : iPad Pro 11 2024 (A2836, A2837, A3006)

    السلة