الوصف

Passive holder. Fits devices with and without handstrap. With AMPS, Vesa 75/100 holes.

معلومات فنية

The holder with locking is to be used when you want to have your tablet extra firmly in place. The holder has a spring stud locking device, it keeps your device in a firm grip in the holder. You can connect e.g. a charging cable to the device when it is in the holder. Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. You have full access to the camera and all buttons and outlets when the device is in the holder. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden.

Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.

التعليمات

Please read all of the instructions and look at the pictures before attaching the holder.

1. Place the holder onto the desired position. Screw the holder into place with the enclosed screws.

2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. Push the locking block downward to lock the unit into the holder.

3. To remove the device from the holder: Slide the locking block upwards. Pull the upper part of the device out from the holder and then lift the device up and out from the holder.

4. The holder is in place.

التوافق

• Getac : F110 6th Gen