الوصف

For device in folded and unfolded position.

معلومات فنية

Keep your device in a holder; firmly in place and easy accessible while driving! Safe, efficient and convenient! The holder is customized with a perfect fit for bare device (not for case). You have full access to the camera, buttons and ports while in use. Easy one-hand insertion and removal.

You can switch between folded and unfolded position while the device is in the holder.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. With 4 mm AMPS standard holes for easy attachment onto a ProClip mounting platform. Mounting plate 42x50 mm. Color: black. Made of hhigh grade Acetal and ABS plastic. Made in Sweden

التعليمات

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

2. To place the device in the holder: Place the upper part of the device in the holder, then press the device forwards and upwards so it snaps into place in the holder.

3. To remove the device from the holder: Press upwards on the lower part of the device, in the same time pull the the device out and down from the holder.

4. The holder is in place.

التوافق

• Samsung : Galaxy Z Fold4 5G