Thabt

Active holder with USB-cable and cig-plug adapter

رقم الصنف : 521663

With USB-cable + cig-plug adapter with 2 USB ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. Fits devices with skin that has the following dimensions: Height: 160-175 mm, Width: 88 mm, Thickness: 2-11 mm.

Apple iPhone 12 Pro Max

Apple iPhone 11 Pro Max

more...

الكمية

طلب مسبق

الوصف

معلومات فنية

Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your device within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the device in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Length of charging cable: 123 cm.

Important note!

In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

The holder is made of Acetal plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.

This holder fits devices with "standard" sized skins, not rugged or extra thick skins or skins with details sticking out.

Important note!

For Apple iPhone 11 Pro Max can you have problem with some settings in the camera.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 17° in each direction. Attach onto ProClip Mounting Platform

This product supports Qualcomm QC 3.0 quick charge (provided the device supports Qualcomm QC 3.0 quick charge).

التعليمات

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

3. To place the device in the holder: Place the upper part of the device in the holder, then press the device forwards and upwards so it snaps into place in the holder. To remove the device from the holder: Press upwards on the lower part of the device, in the same time pull the the device out and down from the holder.

4. The holder is in place.

التوافق