Active holder with cig-plug
With USB-cable + cig-plug adapter with 2 USB ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. Adjustable holder for devices with skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm.
With your mobile in a holder while driving you will always have it within easy sight and reach! And with an active holedr you always have a charged battery when leaving the car. Neat, discreet and convenient! With USB-cable with cig-plug adapter, choose to connect either to the vehicle’s USB outlet or the 12/24V socket. The cig-plug adapter has two USB ports: QC 3.0A + 2.4A. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car. The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42×50 mm with 4 mm AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden.
The adjustable holder fits for devices with skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product.
Before using the holder you need to set the holder’s width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle’s interior. Attach onto ProClip Mounting Platform.
This product supports Qualcomm QC 3.0 quick charge (provided the device supports Qualcomm QC 3.0 quick charge).
– Output Connector Type: Dual USB Type-A Female.
– Output Voltage: 5V, 9V, 12V(Nominal)
– Output Current:
– USB Port 1: 4.9V ~ 5.25V 2.4A (White port, recommended for Apple)
– USB Port 2: 3.6V ~ 6V/3A 6.2-9V/2A 9.2-12V/1.5A (Green port, recommended for Android etc)
– Output Voltage Ripple: 300mV pk-pk at Max Load
– Input Voltage Range: DC 12–24V DC, Input can handle 40V Load dump translent events
– Input Current: 3.0 A DC Max
– Input Current with No device attached: 0.005A
– DC-DC Conversion Efficiency: Over 86% Typical
– Rated Power:
– USB Port 1: 12 Watts Max. White port.
– USB Port 2: 18 Watts Max. Green port.
- Item no: 721237
- EAN: 7320287212372
Item no 721237 fits:
- Apple iPhone 12 (For all countries)
- Apple iPhone 12 Pro (For all countries)
- Apple iPhone 12 Pro Max (For all countries)
Please read all of the instructions and look at the pictures before attaching the holder.
1. To adjust the holder for your device: Loosen the screws on the front side of the holder, so the sides of the holders can be adjusted. Place the device in the holder and press the sides together so the device is firmly in place. Remove the device carefully without moving the sides. Tighten the screws on the front side of the holder.
2. To install the holder: Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
3. Place the attaching plate into the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw so the holder is firmly in place, but still can be adjusted.
4. The holder is in place.
Attach your holder onto a ProClip!
You need two parts; a ProClip for your car, and a holder for your device.